LS 460 V8-4.6L (1UR-FSE) (2007)
SST 09960-20010 (09961-02060, 09961-02010)
(a)
Support the steering knuckle LH with a jack and wooden block.
(b) Remove the 2 clips and 2 nuts.
(c)
Install 2 spacers (SST spacer B) onto the front No. 1 suspension upper arm assembly LH so that there is a space of approximately 1 mm
between the arm and spacers.
SST 09960-20010 (09961-02060)
NOTICE:
^
Make sure to install the spacers (SST spacer B) as the steering knuckle spacer may shift.
^
As SST may become damaged, make sure the space between the arm and spacers is not 1 mm or less.
(d) Using SST, disconnect the front No. 1 suspension upper arm from the steering knuckle.
SST 09960-20010 (09961-02010)
NOTICE:
^
Do not damage the dust cover.
^
As the dust cover may be damaged, adjust SST with the center nut so that the body and crow are parallel.
^
Make sure to tie the string of SST to the vehicle to prevent SST from dropping.
(e)
Install 2 spacers (SST spacer B) onto the front No. 2 suspension upper arm assembly LH so that there is a space of approximately 1 mm
between the arm and spacers.
SST 09960-20010 (09961-02060)