LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Install the clamps to the clips to install the wire.
(b) Connect the sensor connectors.
(c) Attach the clips to the sensor, and attach the wire to the wire installation areas with tape.
3. INSTALL REAR BUMPER COVER See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and Replacement/Installation
4. INSTALL REAR BUMPER PLATE RH See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and Replacement/Installation
5. INSTALL REAR BUMPER PLATE LH See: Body and Frame/Bumper/Rear Bumper/Service and Repair/Removal and Replacement/Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
8. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.