LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Distance Sensor: Service and Repair
Installation
CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION
INSTALLATION
1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Install the sensor with the 3 bolts.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the sensor connector.
2. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Adjustments
3. INSTALL RADIATOR GRILLE ASSEMBLY See: Body and Frame/Grille/Service and Repair/Installation
4. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Installation
5. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
6. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
7. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation