LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2902003.png)
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Installation
3. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Service and Repair/Installation
4. INSTALL DOOR INSIDE HANDLE BEZEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
7. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
