LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Installation
AUDIO / VISUAL: INSTRUMENT PANEL SPEAKER: INSTALLATION
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
-
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
(a) Connect the connector.
(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
(c) Install the speaker with the 2 bolts.
NOTICE:
-
Do not touch the cone part of the speaker.
-
When installing the speaker to the instrument panel be careful that get caught the wires do not get caught between the parts.
2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
(a) Attach the 2 clips and 7 claws to install the panel.
3. INSTALL FRONT PILLAR GARNISH LH
4. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY
(a) Connect the speaker connector.
(b) Temporarily install the speaker by aligning the positioning pins of the speaker with the instrument panel.
(c) Install the speaker with the 2 bolts.
NOTICE:
-
Do not touch the cone part of the speaker.
-
When installing the speaker to the instrument panel be careful that get caught the wires do not get caught between the parts.