LS 460 AWD V8-4.6L (1UR-FSE) (2009)
terminal.
3. REMOVE REAR DOOR SCUFF PLATE LH
(a) for Standard Body:
(1) Remove the rear door scuff plate LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Removal.
(b) for Long Body:
(1) Remove the rear door scuff plate LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Long Body)/Removal.
4. REMOVE REAR DOOR SCUFF PLATE RH
(a) for Standard Body:
(1) Remove the rear door scuff plate RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Removal.
(b) for Long Body:
(1) Remove the rear door scuff plate RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Long Body)/Removal.
5. REMOVE REAR SEAT ASSEMBLY
(a) for Power Seat:
(1) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power Seat)/Removal.
(b) for Ottoman:
(1) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
(c) for Fixed Seat:
(1) Remove the rear seat See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Removal.
6. REMOVE REAR SEAT SIDE GARNISH LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Removal
7. REMOVE REAR SEAT SIDE GARNISH RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Removal
8. REMOVE ROOF SIDE GARNISH INNER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for Standard Body)/Removal
9. REMOVE ROOF SIDE GARNISH INNER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for Standard Body)/Removal
10. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat
Outer Belt Assembly/Removal
11. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (W/ Sunshade) See: Windows and Glass/Windows/Window Shade/Service and
Repair/Rear Sunshade Assembly/Removal
12. REMOVE STEREO COMPONENT SPEAKER ASSEMBLY
(a) Disconnect the speaker connector.
(b) Remove the 4 bolts and speaker.
NOTE:
Do not touch the cone part of the speaker.
Installation
AUDIO / VISUAL: REAR PACKAGE TRAY SPEAKER: INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL STEREO COMPONENT SPEAKER ASSEMBLY
(a) Install the speaker with the 4 bolts.
NOTE:
Do not touch the cone part of the speaker.
HINT: Install the bolts in the order shown in the illustration.