LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Apply MP grease to the sliding areas of the lock.
(b) Connect the hood lock control cable.
(c) Install the hood lock.
(d) Install the 2 bolts and nut.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(e) Install a new cap.
4. INSTALL FRONT FENDER PROTECTOR UPPER LH
(a) Attach the 3 clips to install the protector.
5. INSTALL HOOD LOCK CONTROL CABLE COVER
(a) Attach the claw to install the cable cover.
(b) Install the 3 screws.
6. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Accessories and Optional Equipment/Collision Avoidance and Parking
Assist Systems/Distance Sensor/Service and Repair/Installation
7. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Accessories and Optional Equipment/Collision Avoidance and Parking
Assist Systems/Distance Sensor/Adjustments
8. INSTALL RADIATOR GRILLE ASSEMBLY See: Grille/Service and Repair/Installation
9. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Installation
10. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair/Installation
11. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
12. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Installation
13. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation