Lexus Workshop Service and Repair Manuals

Hood Sensor/Switch (For Alarm): Service and Repair
Installation

THEFT DETERRENT: ENGINE HOOD COURTESY SWITCH: INSTALLATION

INSTALLATION

1. INSTALL HOOD LOCK ASSEMBLY See: Hood Latch Release Cable/Service and Repair/Installation
2. INSTALL FRONT FENDER PROTECTOR UPPER LH See: Hood Latch Release Cable/Service and Repair/Installation
3. INSTALL HOOD LOCK CONTROL CABLE COVER See: Hood Latch Release Cable/Service and Repair/Installation
4. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Accessories and Optional Equipment/Collision Avoidance and Parking

Assist Systems/Distance Sensor/Service and Repair/Installation

5. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY See: Accessories and Optional Equipment/Collision Avoidance and Parking

Assist Systems/Distance Sensor/Adjustments

6. INSTALL RADIATOR GRILLE ASSEMBLY See: Grille/Service and Repair/Installation
7. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Installation
8. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle

Body/Service and Repair/Installation

9. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine/Installation

10. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and

Replacement/Engine/Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
13. PERFORM INITIALIZATION

(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.

NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.