LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-3069017.png)
(b) Remove the 2 screws.
(c) Using a moulding remover, detach the 2 clips.
(d) Disconnect the 2 connectors and then remove the map light.
25. REMOVE SPOT LIGHT ASSEMBLY
(a) Using a moulding remover, detach the 4 claws.
(b) Disconnect the connector and then remove the spot light.
26. REMOVE REAR VANITY LIGHT ASSEMBLY
HINT: Use the same procedure to remove the vanity light on the other side.
(a) Using a screwdriver, detach the 4 claws and remove the lens.
HINT: Tape the screwdriver tip before use.
(b) Remove the 2 screws.
(c) Using a moulding remover, detach the claw.
(d) Disconnect the connector and then remove the vanity light.
