LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-3152004.png)
(a) Disconnect the LA, LD, and LG junction block connectors.
(b) Measure the resistance and voltage according to the value(s) in the table below.
HINT:
*1: W/ Pre-collision System
*2: W/O Pre-collision System
If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the LA, LD, and LG junction block connectors.
(d) Measure the voltage according to the value(s) in the table below.
