LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Power Door Lock Switch: Testing and Inspection
DOOR LOCK: DOOR CONTROL SWITCH: INSPECTION
INSPECTION
1. INSPECT DOOR CONTROL SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the control switch.
(b) When terminal 5 (ILL+) of the connector is connected to the positive (+) battery terminal and terminal 3 (E) is connected to the negative (-)
battery terminal, check that the indicator (LED) illuminates.