LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1765002.png)
Standard voltage:
If the result is not as specified, check the harness wires and connectors and replace them as necessary.
If the harness wires and connectors are in good condition, replace the engine room junction block assembly.
2. CHECK ABS MOTOR RELAY (ABS MTR2)
(a) Remove the ABS MTR2 relay from the No. 3 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
