LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1788002.png)
20. REMOVE BRAKE FLUID RESERVOIR See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Removal
21. REMOVE NO. 1 RESERVOIR HOSE See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Removal
22. REMOVE RESERVOIR BRACKET See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Removal
23. REMOVE FRONT WHEEL
24. DISCONNECT BRAKE TUBE
(a) Using a union nut wrench (10 mm), disconnect the 6 brake tubes from the actuator.
(b) Use tags or make a note to identify the reconnection locations.
(c) Using a union nut wrench (10 mm), disconnect the No. 1 (labeled A) and No. 2 (labeled B) brake actuator tubes.
NOTE:
Do not damage the No. 1 and No. 2 brake actuator tubes.
25. REMOVE BRAKE ACTUATOR AND BRAKE ACCUMULATOR PUMP ASSEMBLY
