LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Remove the 4 nuts.
(b) Remove the 2 bolts and brake pedal support.
Installation
BRAKE: BRAKE PEDAL SUPPORT: INSTALLATION
INSTALLATION
NOTE:
While the battery is connected, even if the engine switch is off, the brake control system activates when the brake pedal is depressed or the
door courtesy switch turns on. Therefore during servicing of the brake system components, do not operate the brake pedal and open/close the
doors while the battery is connected.
1. INSTALL BRAKE PEDAL SUPPORT ASSEMBLY
(a) Install the brake pedal support with the 2 bolts.