LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Connect the stop light switch connector (labeled A) and then attach the wire harness clamp (labeled B).
(b) Connect the brake pedal stroke sensor connector (labeled C).
5. CHECK BRAKE DRAG
6. CHECK AND ADJUST BRAKE PEDAL HEIGHT See: Adjustments
7. ADJUST BRAKE PEDAL STROKE SENSOR See: Adjustments
8. CHECK BRAKE PEDAL FREE PLAY See: Adjustments
9. CHECK BRAKE PEDAL RESERVE DISTANCE See: Adjustments
10. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Install the instrument panel safety pad See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation.
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
12. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
13. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.