LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(c) Install the radiator to the front crossmember.
HINT: Install the radiator to the front side holes of the radiator's lower support.
5. CONNECT LIQUID TUBE SUB-ASSEMBLY A See: Heating and Air Conditioning/Condenser HVAC/Service and Repair/Installation
6. CONNECT DISCHARGE HOSE SUB-ASSEMBLY See: Heating and Air Conditioning/Condenser HVAC/Service and Repair/Installation
7. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY
(a) Attach the wire harness to the upper support with the 5 clamps.
(b) Install the upper support with the 5 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(c) Attach the 2 clamps to the radiator support LH and RH side.
(d) Connect the 3 connectors.
8. INSTALL HOOD LOCK ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Installation
9. INSTALL HOOD LOCK CONTROL CABLE COVER