LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(c) Lay a strip of Plastigage across each of the camshaft journals.
(d) Install the bearing caps See: Service and Repair/Camshaft (for Bank 2)/Installation.
NOTE:
Do not turn the camshaft.
(e) Install the camshaft housing See: Service and Repair/Camshaft (for Bank 2)/Installation.
NOTE:
Do not turn the camshaft.
(f) Remove the bearing caps See: Service and Repair/Camshaft (for Bank 2)/Removal.
(g) Measure the Plastigage at its widest point.
Standard oil clearance:
Maximum oil clearance:
If the oil clearance is greater than the maximum, replace the camshaft. If necessary, replace the camshaft housing.