LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Install the 2 spacers and 2 mounting insulators with the 2 nuts.
Torque: 35 Nm (357 kgf-cm, 26 ft-lbf)
2. INSTALL FRONT FRAME ASSEMBLY See: Service and Repair/Removal and Replacement/Engine/Installation
3. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR See: Exhaust System/Exhaust Manifold/Service and Repair/Installation
4. INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR See: Exhaust System/Exhaust Manifold/Service and Repair/Installation
5. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE See: Service and Repair/Removal and Replacement/Engine/Installation
6. INSTALL ENGINE AND TRANSMISSION
(a) Install the engine and transmission See: Service and Repair/Removal and Replacement/Engine/Installation.
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.