LS 460 AWD V8-4.6L (1UR-FSE) (2009)
24. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the cooler refrigerant discharge hose from the cooler condenser.
NOTICE:
-
When loosening the bolt, do not allow any tools to contact the hose.
-
When loosening the bolt, hold a part of the hose near the connector.
(b) Remove the O-ring from the cooler refrigerant discharge hose.
NOTE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
25. DISCONNECT LIQUID TUBE SUB-ASSEMBLY
(a) Remove the bolt and disconnect the cooler refrigerant liquid tube from the cooler condenser.
NOTICE:
-
When loosening the bolt, do not allow any tools to contact the tube.
-
When loosening the bolt, hold a part of the tube near the connector.
(b) Remove the O-ring from the cooler refrigerant liquid tube.
NOTE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.