LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2520014.png)
(a) Install the damper servo with the 2 screws.
(b) Connect the connector.
(c) Set the lever so that the cutout part engages with a tooth of the gear, and then attach the 3 claws to install the lever.
16. INSTALL AIR OUTLET SERVO MOTOR RH (Face)
(a) Install the damper servo with the 2 screws.
(b) Connect the connector.
(c) Set the lever so that the cutout part engages with a tooth of the gear, attach the claw to install the lever.
17. INSTALL AIR MIX SERVO MOTOR LH (Cool)
(a) Make sure that the rod does not rotate further by trying to rotate it clockwise.
