LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Install the package tray trim panel See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer Belt
Assembly/Installation.
23. INSTALL ROOF SIDE GARNISH INNER LH
(a) for Standard Body:
Install the roof side garnish inner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Installation.
(b) for Long Body:
Install the roof side garnish inner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Installation.
24. INSTALL ROOF SIDE GARNISH INNER RH
(a) for Standard Body:
Install the roof side garnish inner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Installation.
(b) for Long Body:
Install the roof side garnish inner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Installation.
25. INSTALL REAR SEAT SIDE GARNISH LH
(a) for Standard Body:
Install the rear seat side garnish See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Installation.
(b) for Long Body:
Install the rear seat side garnish See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Installation.
26. INSTALL REAR SEAT SIDE GARNISH RH
(a) for Standard Body:
Install the rear seat side garnish See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Installation.
(b) for Long Body:
Install the rear seat side garnish See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Installation.
27. INSTALL REAR DOOR SCUFF PLATE LH
(a) for Standard Body:
Install the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Installation.
(b) for Long Body:
Install the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Installation.
28. INSTALL REAR DOOR SCUFF PLATE RH
(a) for Standard Body:
Install the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Standard
Body)/Installation.
(b) for Long Body:
Install the rear door scuff plate See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for Long
Body)/Installation.
29. INSTALL REAR SEAT ASSEMBLY (for Power Seat)
(a) Install the rear seat assembly See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power Seat)/Installation.
30. INSTALL REAR SEAT ASSEMBLY (for Ottoman)
(a) Install the rear seat assembly See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Installation.
31. INSTALL REAR SEAT ASSEMBLY (for Fixed Type)
(a) Install the rear seat assembly See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Installation.
32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
33. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
34. ADD COMPRESSOR OIL See: Service and Repair
35. CHARGE REFRIGERANT See: Service and Repair
36. WARM UP ENGINE See: Service and Repair
37. CHECK FOR LEAKAGE OF REFRIGERANT See: Service and Repair
38. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
39. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
Disassembly