LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Installation
AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL AMBIENT TEMPERATURE SENSOR
(a) Attach the clamp to install the sensor.
(b) Connect the connector.
2. INSTALL FRONT BUMPER COVER
(a) Install the front bumper cover See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation.
3. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
6. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.