LS 460 AWD V8-4.6L (1UR-FSE) (2009)
NOTE:
If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted. Insert the sensor within range C
shown in the illustration.
(a) Install the sensor as shown in the illustration.
(b) Attach the clamp.
2. INSTALL EVAPORATOR SUB-ASSEMBLY
(a) Install the evaporator.
(b) Attach the 3 claws to install the front cooling unit case.
(c) Install the 6 screws.
(d) Install new butyl tape and packing.