LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2568015.png)
(b) Install the damper servo with the 2 screws.
(c) Connect the connector.
18. INSTALL AIR MIX SERVO MOTOR RH (Cool)
(a) Make sure that the rod does not rotate further by trying to rotate it clockwise.
(b) Install the damper servo with the 2 screws.
(c) Connect the connector.
19. INSTALL COOL AIR BYPASS SERVO MOTOR LH
(a) Set the lever so that the cutout part engages with a tooth of the gear, install the damper servo with the 2 screws.
(b) Connect the connector.
20. INSTALL COOL AIR BYPASS SERVO MOTOR RH
(a) Set the lever so that the cutout part engages with a tooth of the gear, install the damper servo with the 2 screws.
(b) Connect the connector.
21. INSTALL AIR DUCT LH
