LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE CENTER STOP LIGHT ASSEMBLY
10. READ VALUE USING TECHSTREAM (STOP LIGHT SWITCH)
(a) Using the Techstream, read the Data List.
Body No.4
OK:
Condition sign can be displayed.
NG -- INSPECT STOP LIGHT SWITCH ASSEMBLY
OK -- REPLACE LUGGAGE ROOM JUNCTION BLOCK (REAR JUNCTION BLOCK ECU)
11. INSPECT STOP LIGHT SWITCH ASSEMBLY
(a) Remove the stop light switch See: Brake Light Switch/Service and Repair/Removal.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE STOP LIGHT SWITCH ASSEMBLY
OK -- Continue to next step.
12. CHECK HARNESS AND CONNECTOR (BATTERY - STOP LIGHT SWITCH)