LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-3644002.png)
(a) Disconnect the X4 and X6 light connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (MAP LIGHT - REAR VANITY LIGHT)
