LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-715010.png)
-
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and
settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
-
Disconnect the cable from the negative battery terminal for 2 seconds or more.
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
15. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
16. PERFORM YAW RATE AND DECELERATION SENSOR ZERO POINT CALIBRATION
(a) Perform the yaw rate and deceleration sensor zero point calibration. See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Acceleration/Deceleration Sensor/Testing and Inspection/Programming and Relearning
17. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT
(a) Initialize the rotation angle sensor and calibrate torque sensor zero point. See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Steering/Steering Angle Sensor/Testing and Inspection/Power Steering System
18. PERFORM INITIALIZATION
(a) Perform the initialization. See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization
