LS 460 AWD V8-4.6L (1UR-FSE) (2009)
terminal.
5. REMOVE REAR SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear seat assembly LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power Seat)/Removal.
6. REMOVE REAR SEAT ASSEMBLY LH (for Ottoman)
(a) Remove the rear seat assembly LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Removal.
7. REMOVE REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
(a) Remove the rear seat cushion assembly See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Removal.
8. REMOVE REAR FLOOR NO. 2 SERVICE HOLE COVER See: Fuel Pump/Service and Repair/Removal and Replacement/Fuel Pump/Removal
9. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY See: Fuel Pump/Service and Repair/Removal and
Replacement/Fuel Pump/Removal
Installation
1UR-FSE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION
INSTALLATION
1. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY See: Fuel Pump/Service and Repair/Removal and
Replacement/Fuel Pump/Installation
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
4. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
5. INSPECT FOR FUEL LEAK See: Testing and Inspection
6. INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER
(a) Install the service hole cover with new butyl tape.
7. INSTALL REAR SEAT ASSEMBLY LH (for Power Seat)
(a) Install the rear seat assembly LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Power Seat)/Installation.
8. INSTALL REAR SEAT ASSEMBLY LH (for Ottoman)
(a) Install the rear seat assembly LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Ottoman)/Installation.
9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type)
(a) Install the rear seat cushion assembly See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Installation.