LS 460 AWD V8-4.6L (1UR-FSE) (2009)
CELLULAR COMMUNICATION: BUS BUFFER ECU: REMOVAL
REMOVAL
1. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal
2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
3. REMOVE BUS BUFFER ECU
(a) Disconnect the connector.
(b) Remove the nut and ECU.
Installation
CELLULAR COMMUNICATION: BUS BUFFER ECU: INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL BUS BUFFER ECU
(a) Install the ECU with the nut.
(b) Connect the connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
3. INSTALL NO. 2 INSTRUMENT CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation