LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Cruise Control Module: Service and Repair
Installation
CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL DRIVING SUPPORT ECU
(a) Install the ECU with the nut.
NOTICE:
-
Do not use an ECU which has been dropped or subjected to any strong shocks.
-
During the removal and installation, do not remove the drip-proof cover.
-
When a new ECU is installed, perform initialization.
2. INSTALL DASH PANEL EXTENSION LH
(a) Install the dash panel extension with the 2 nut and bolt.
(b) Connect the connector.
(c) Attach the clamp.
3. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining (for
Standard Body)/Installation
4. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Roof Headlining
(for Standard Body)/Installation