Lexus Workshop Service and Repair Manuals

Instrument Panel/Service and Repair/Installation

10. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
13. ADJUST VEHICLE HEIGHT

NOTE:
If the suspension control ECU has been replaced, be sure to adjust the vehicle height.

(a) Adjust the vehicle height See: Steering and Suspension/Suspension/Adjustments.

14. PERFORM INITIALIZATION

(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.

NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

15. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic

Overview/Diagnosis System.

16. ADJUST HEADLIGHT ASSEMBLY

(a) Adjust the headlight See: Lighting and Horns/Headlamp/Adjustments.