LS 460 AWD V8-4.6L (1UR-FSE) (2009)
1. INSTALL TCM
(a) Install the TCM with the 2 nuts.
Torque: 5.5 Nm (56 kgf-cm, 48 in-lbf)
(b) Connect the 4 connectors.
2. INSTALL ENGINE ROOM ECU COVER
(a) Install the engine room ECU cover with the 3 bolts.
Torque: 7.8 Nm (80 kgf-cm, 69 in-lbf)
3. INSTALL ENGINE ROOM SIDE COVER LH
4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY
(a) Install the air cleaner inlet cover with the 2 clips.
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
6. INSTALL COWL TOP VENTILATOR LOUVER See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
7. CHECK AUTOMATIC TRANSMISSION SYSTEM PRECAUTION
(a) After replacing the TCM, certain procedures are necessary See: Powertrain Management/Transmission Control Systems/Service
Precautions/AA80F Automatic Transmission System.