LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2592005.png)
To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for the SST
wire harness inside the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
(2) Check that no one is within a 10 m (33 ft.) radius of the tire which the front seat side airbag is tied to.
(3) Press the SST activation switch and deploy the airbag.
CAUTION:
When deploying the airbag, make sure that no one is near the tire.
HINT: The airbag is deployed as the LED of the SST activation switch comes on.
(h) Dispose of the front seat side airbag.
-
The front seat side airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
-
Use gloves and safety glasses when handling a front seat side airbag with a deployed airbag.
-
Do not apply water to a front seat side airbag with a deployed airbag.
-
Always wash your hands with water after completing the operation.
(1) Remove the front seat side airbag from the tire.
(2) Place the front seat side airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.
