lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Front Seat Side Airbag Assembly|Page 10077 > < Front Seat Side Airbag Assembly|Page 10075
Page 31
background image

in accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of
TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
-

Never dispose of a front passenger side knee airbag that has an unactivated airbag.

-

The airbag produces an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a
nuisance to nearby residents.

-

When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away
from electrical noise.

-

When deploying the airbag, perform the operation at least 10 m (33 ft.) away from the front passenger side knee airbag.

-

The front passenger side knee airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes
after deployment.

-

Use gloves and safety glasses when handling a front passenger side knee airbag with a deployed airbag.

-

Do not apply water to a front passenger side knee airbag assembly with a deployed airbag.

-

Always wash your hands with water after completing the operation.

-

An airbag or pretensioner may be activated by static electricity. To prevent this, be sure to touch a metal surface with bare hands
to discharge static electricity before performing this procedure.

1. DISPOSE OF FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

HINT: Prepare a battery as the power source to deploy the airbag.

(a) Check the function of SST See: Driver Side Knee Airbag Assembly/Removal.
(b) Read the precaution See: Service Precautions.
(c) Disconnect the cable from the negative (-) battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.

(d) Remove the front passenger side knee airbag See: Front Passenger Side Knee Airbag Assembly/Removal.
(e) Install SST.

(1) Connect the SST connector to the front passenger side knee airbag.

SST: 09082-00700
SST: 09082-00770

NOTE:
To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.
(2) Install the front passenger side knee airbag See: Front Passenger Side Knee Airbag Assembly/Removal.
NOTE:
Take care not to damage the SST wire harness.

Front Seat Side Airbag Assembly|Page 10077 > < Front Seat Side Airbag Assembly|Page 10075