lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Front Seat Side Airbag Assembly|Page 10093 > < Front Seat Side Airbag Assembly|Page 10091
Page 47
background image

CAUTION:
Place the disc wheel on level ground.
(1) Connect the SST connector.

SST: 09082-00700

NOTE:
To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for the SST
wire harness inside the disc wheel.

(2) Move SST at least 10 m (33 ft.) away from the steering pad tied down to the disc wheel.

(e) Cover the steering pad with a cardboard box or tires.

(1) Covering method using a cardboard box: Cover the steering pad with the cardboard box and place the weights on the cardboard box in 4

places with at least 190 N (19 kgf, 43 lbf).
Cardboard box size:
Must exceed the following dimensions
X
460 mm (18.11 in.)
Y
650 mm (25.59 in.)

NOTICE:
-

When the dimension Y of the cardboard box exceeds the diameter of the disc wheel with tire which the steering pad is tied to, X should be
the following size. X = 460 mm (18.11 in.) + width of tire

-

If a cardboard box which is smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag
deployment.

Front Seat Side Airbag Assembly|Page 10093 > < Front Seat Side Airbag Assembly|Page 10091