LS 460 AWD V8-4.6L (1UR-FSE) (2009)
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
13. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
14. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION
(a) Perform the yaw rate sensor zero point calibration See: Acceleration/Deceleration Sensor/Testing and Inspection/Programming and Relearning
.
15. CHECK YAW RATE SENSOR SIGNAL
(a) Check the yaw rate sensor signal See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and
Inspection/Component Tests and General Diagnostics/Test Mode Procedure.