LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-571001.png)
Camshaft Position Sensor: Service and Repair
Installation
1UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT POSITION SENSOR: INSTALLATION
INSTALLATION
1. INSTALL CAMSHAFT POSITION SENSOR
(a) Install the camshaft position sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the camshaft position sensor connector.
2. INSTALL V-BANK COVER SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation
