LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(b) Remove the ST CUT relay from the engine room No. 2 relay block.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance (Check for open):
Standard resistance (Check for short):
NG -- REPLACE ENGINE ROOM NO. 2 RELAY BLOCK, JUNCTION BLOCK
OK -- REPLACE HARNESS OR CONNECTOR (IGNITION RELAY NO. 2 (IG2) - BATTERY)
9. INSPECT STARTER RELAY (ST)
(a) Remove the ST relay from the engine room No. 2 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE STARTER RELAY (ST)
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (STARTER RELAY (ST) - PARK/NEUTRAL POSITION SWITCH, BODY GROUND)