LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Instrument Panel/Service and Repair/Installation
10. INSTALL INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSTALL COWL TOP VENTILATOR LOUVER RH See: Starting and Charging/Charging System/Alternator/Service and Repair/Installation
13. ADJUST VEHICLE HEIGHT
NOTE:
If the suspension control ECU has been replaced, be sure to adjust the vehicle height.
(a) Adjust the vehicle height See: Suspension/Adjustments.
14. PERFORM INITIALIZATION
(a) Perform initialization See: Testing and Inspection/Programming and Relearning/Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
15. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
16. ADJUST HEADLIGHT ASSEMBLY
(a) Adjust the headlight See: Lighting and Horns/Headlamp/Adjustments.