LS 460 AWD V8-4.6L (1UR-FSE) (2009)
OK:
YES is displayed on the Techstream screen.
NG -- CHECK SMART ACCESS SYSTEM WITH PUSH-BUTTON START
OK -- Continue to next step.
3. CHECK STEERING LOCK ACTUATOR
(a) Immediately after turning the engine switch on (IG), measure the voltage between terminals L33-3 (IGE) and L33-2 (SGND) of the
steering lock actuator.
Result
A -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
B -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (STEERING LOCK ACTUATOR - MAIN BODY ECU)
(a) Disconnect the L13 main body ECU connector.
(b) Disconnect the L33 steering lock actuator connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance: