LS 460 AWD V8-4.6L (1UR-FSE) (2009)
terminal.
4. REMOVE FRONT WHEELS
5. REMOVE NO. 1 ENGINE UNDER COVER (for 2WD) See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
6. REMOVE NO. 2 ENGINE UNDER COVER (for 2WD) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal
7. REMOVE NO. 1 ENGINE UNDER COVER (for AWD) See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
8. REMOVE NO. 2 ENGINE UNDER COVER (for AWD) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine/Removal
9. REMOVE NO. 2 FRONT STABILIZER BRACKET RH (for AWD)
(a) Disconnect the 2 clamps.
(b) Remove the bolt and bracket.
10. REMOVE FRONT SUSPENSION MEMBER PROTECTOR LOWER (for 2WD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine/Removal
11. REMOVE FRONT SUSPENSION MEMBER PROTECTOR LOWER (for AWD) See: Engine, Cooling and Exhaust/Engine/Service and
Repair/Removal and Replacement/Engine/Removal
12. REMOVE FRONT NO. 1 STABILIZER BRACKET LH (for AWD) See: Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Removal
13. REMOVE FRONT NO. 1 STABILIZER BRACKET RH (for AWD) See: Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Removal
14. REMOVE FRONT STABILIZER BAR (for AWD) See: Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer Bar/Removal
15. REMOVE FRONT NO. 1 STABILIZER BAR BUSH (for AWD) See: Suspension/Stabilizer Bar/Service and Repair/Front Stabilizer
Bar/Removal
16. REMOVE FRONT SUSPENSION MEMBER BRACKET SUB-ASSEMBLY LH (for AWD)
(a) Remove the 4 bolts and bracket.
17. REMOVE FRONT SUSPENSION MEMBER BRACKET SUB-ASSEMBLY RH (for AWD)
(a) Remove the 4 bolts and bracket.
18. DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY (for 2WD) See: Steering Column/Service and Repair/Removal and
Replacement/Steering Column Assembly (W/ VGRS)/Removal
19. DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY (for AWD) See: Steering Column/Service and Repair/Removal and
Replacement/Steering Column Assembly (W/ VGRS)/Removal
20. DISCONNECT TIE ROD ASSEMBLY LH
(a) Remove the cotter pin and nut.