LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Disconnect the L6 outer mirror switch connector.
(b) Disconnect the L23 spiral cable connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(d) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE WIRE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. INSPECT SPIRAL CABLE SUB-ASSEMBLY
NOTE:
If there are any defects as mentioned below, replace the spiral cable with a new one:
Scratches, cracks, dents or chips on the connector or the spiral cable.