LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-2314001.png)
Ball Joint: Specifications
Ball Joint wear limit:
Temporarily install the nut, and use a torque wrench to turn the nut continuously at a rate of 3 to 5 seconds per turn. Take the torque reading on the 5th
turn.
Standard turning torque ..................................................................................................................................... 6.0 Nm (61.1 kgf-cm, 53.1 in.lbf) or less
If the result is not as specified, replace the front lower ball joint assembly.