LS 460 AWD V8-4.6L (1UR-FSE) (2009)
Seals and Gaskets: Service and Repair
Replacement
AA80E AUTOMATIC TRANSMISSION: AUTOMATIC TRANSMISSION REAR OIL SEAL: REPLACEMENT
REPLACEMENT
1. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
(a) Remove the propeller with center bearing shaft See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and
Repair/Removal and Replacement/Propeller Shaft Assembly/Removal.
2. REMOVE AUTOMATIC TRANSMISSION FLANGE YOKE ASSEMBLY
(a) Using SST and a hammer, loosen the staked part of the nut.
SST: 09930-00010
HINT: Move the shift lever to P.
(b) Set SST.
SST: 09330-00021
SST: 09950-30012
09955-03040
(c) Using SST and a 30 mm socket wrench, remove the nut.
(d) Remove SST.
(e) Tap out the flange yoke with a plastic-faced hammer to remove it.
(f) Using a screwdriver, pry out the oil seal from the automatic transmission flange yoke.