LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1633004.png)
(h) Remove the check ball body and spring.
7. REMOVE SPEED SENSOR NT
(a) Disconnect the sensor connector.
(b) Using a T30 "TORX" wrench, remove the bolt and speed sensor from the oil pump.
(c) Remove the O-ring from the speed sensor.
8. REMOVE SPEED SENSOR NC3
(a) Disconnect the sensor connector.
(b) Remove the bolt and speed sensor from the transmission case.
9. REMOVE SPEED SENSOR SP2
(a) Disconnect the sensor connector.
(b) Remove the bolt and speed sensor from the transmission case.
Installation
AA80F AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION
INSTALLATION
1. INSTALL SPEED SENSOR SP2
(a) Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the sensor connector.
