LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1661002.png)
2. INSPECT SHIFT SOLENOID VALVE SL2
(a) Measure the resistance of the shift solenoid valve.
Standard resistance:
If the resistance is not within the specified range, replace the shift solenoid valve SL2.
(b) Connect the battery's positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector.
Then check that the valve moves and makes an operating noise.
OK:
Valve moves and makes operating noise.
3. INSPECT SHIFT SOLENOID VALVE SL3
(a) Measure the resistance of the shift solenoid valve.
Standard resistance:
