LS 460 AWD V8-4.6L (1UR-FSE) (2009)
(a) Remove the 8 bolts from the differential carrier cover.
(b) Using a brass bar and a hammer, remove the differential carrier cover from the differential carrier.
-
Set the brass bar on the ribbed part of the differential carrier cover.
-
Do not damage the installation surface of the differential carrier.
3. REMOVE REAR DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR
(a) Remove the bolt and oil deflector from the differential carrier cover.
4. FIX DIFFERENTIAL CARRIER ASSEMBLY REAR
(a) Set the differential carrier to an overhaul stand as shown in the illustration.
HINT: Install the differential carrier to the back surface side of the ring gear as shown in the illustration.
5. INSPECT DIFFERENTIAL RING GEAR RUNOUT