LS 460 AWD V8-4.6L (1UR-FSE) (2009)
/Page-1676004.png)
without SST - Torque: 142 Nm (1450 kgf-cm, 105 ft-lbf)
with SST - Torque: 103 Nm (1054 kgf-cm, 76 ft-lbf)
NOTICE:
-
Use a torque wrench with a fulcrum length of 400 mm (16 in.)
-
Tighten the bolts so that they do not interfere with the bolt holes of the mount cushions.
(g) Using SST and a 12 mm socket hexagon wrench, tighten the bolt (C).
SST: 09249-63010
without SST - Torque: 142 Nm (1450 kgf-cm, 105 ft-lbf)
with SST - Torque: 103 Nm (1054 kgf-cm, 76 ft-lbf)
NOTICE:
-
Use a torque wrench with a fulcrum length of 400 mm (16 in.)
-
Tighten the bolts so that they do not interfere with the bolt holes of the mount cushions.
(h) Tighten the 2 bolts (B).
Torque: 127 Nm (1300 kgf-cm, 94 ft-lbf)
NOTE:
Make sure that the mount stop upper and lower are not shifted or tilted.
6. INSTALL REAR AXLE ASSEMBLY LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and
Replacement/Rear Drive Shaft Assembly/Installation
7. INSTALL REAR AXLE ASSEMBLY RH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and
Replacement/Rear Drive Shaft Assembly/Installation
8. INSTALL REAR SUSPENSION MEMBER BRACE LH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal and Replacement/Rear Drive Shaft Assembly/Installation
9. INSTALL REAR SUSPENSION MEMBER BRACE RH See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal and Replacement/Rear Drive Shaft Assembly/Installation
10. INSTALL NO. 1 DIFFERENTIAL SUPPORT PROTECTOR See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal and Replacement/Rear Drive Shaft Assembly/Installation
11. INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR See: Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and
Repair/Removal and Replacement/Rear Drive Shaft Assembly/Installation
12. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
(a) Install the propeller with center bearing shaft assembly See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and
Repair/Removal and Replacement/Propeller Shaft Assembly/Installation.
