LS 460 AWD V8-4.6L (1UR-FSE) (2009)
SST: 09330-50010
SST: 09950-00020
SST: 09950-50013
09952-05010
09955-05040
NOTE:
Be sure to install the bearing in the correct direction.
(c) Using SST, insert a new No. 2 dust deflector until it almost touches the rubber of the No. 1 center support bearing assembly.
SST: 09950-40011
09951-04020
09953-04030
SST: 09330-50010
SST: 09950-00020
SST: 09950-50013
09952-05010
09955-05040
NOTE:
Be careful not to damage the No. 2 dust deflector.
(d) Using a snap ring expander, install a new snap ring.
2. INSTALL PROPELLER INTERMEDIATE SHAFT
(a) Install the dust boot.
NOTE:
Assemble the propeller intermediate shaft assembly after wrapping vinyl tape around the spline so that it will not damage the boot.
(b) Apply grease to the spline.
Grease:
Molybdenum disulphide lithium base NLGI No. 2
(c) Align the matchmarks and assemble the intermediate shaft and propeller shaft.