LS 460 AWD V8-4.6L (1UR-FSE) (2009)
LF1A TRANSFER: TRANSFER CASE REAR OIL SEAL: REPLACEMENT
REPLACEMENT
1. DRAIN TRANSFER OIL See: Fluid - Transfer Case/Service and Repair
2. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
(a) Remove the propeller shaft with center bearing assembly See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and
Repair/Removal and Replacement/Propeller Shaft Assembly/Removal.
3. REMOVE DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
(a) Using SST and a hammer, loosen the staked part of the transfer output shaft nut.
SST: 09930-00010
-
Completely loosen the staked part of the transfer output shaft nut.
-
Do not damage the threads of the No. 1 differential case.
-
Use SST with the tapered surface facing the No. 1 differential case.
-
Do not grind the end of SST with a grinder or other tool.
(b) Using SST, hold the companion flange in place.
SST: 09330-00021
SST: 09950-30012
09955-03040
(c) Using a 30 mm socket wrench, remove the transfer output shaft nut.